[Introduction]: A dry magnetic separator for strong magnetic minerals with coarse particles, and it is also called magnetic pulley.
[Capacity]: 100t/h-350t/h
[Improvement]: Cylinder could be lined with Xinhai wear- resistant rubber to prolong the service life
Large feeding particle size (450-0mm), no classification before feeding;
High strength and high reliability of the mechanical structure guarantee the normal work of the magnetic drum in a variety of harsh environment;
The demagnetization rate of the magnetic density within 8 years is no more than 5%;
Can not only be the driving roller but also the driven roller.
The materials are uniformly fed to the belt. When materials go through the permanent magnetic drum, the non-magnetic and low-magnetic particles will leave the belt surface because of the centrifugal force and gravitation. Meanwhile, strong-magnetic particles are absorbed to the belt by the magnetic force and then fall into the magnetic trough when the belt leaves the magnetic pulley.
| Model & Spec. | Diameter of Cylinder (mm) | Length of Cylinder (mm) | Width of Belt (mm) | Surface Magnetic Density (mt) | Capacity (t/h) | Feed Size (mm) | Total Weight (t) |
| CTGG-0812 | 800 | 1200 | 1000 | 300~500 | ≤100 | ≤200 | 2.1 |
| CTGG-0814 | 800 | 1400 | 1200 | 300~500 | ≤120 | ≤200 | 2.6 |
| CTGG-0816 | 800 | 1600 | 1400 | 300~500 | ≤150 | ≤200 | 3.2 |
| CTGG-0818 | 800 | 1800 | 1600 | 300~500 | ≤180 | ≤200 | 3.9 |
| CTGG-1018 | 1000 | 1800 | 1600 | 300~500 | ≤270 | ≤250 | 4.4 |
| CTGG-1218 | 1200 | 1800 | 1600 | 300~500 | ≤350 | ≤300 | 5.0 |
